LG LHB645 Service Manual Download Page 30

Page: 30 / 113

2-15

DIGITAL DISPLAY & MEDIA TRAINING MASTER

What cables is the customer

using to connect the DVD?

YES

Determine what cables the customer is using to connect the BD

to the TV and if connected properly. Refer to OM for connections.

Tighten any loose cables. Make sure the customer has audio

cables connected if using an HDMI to DVI adapter or video-only cables

(DVI, component, etc).

Is the customer

able to see video?

YES

Make sure the customer has not routed

video and audio to separate inputs.

Does issue occur on
more than one disc?

YES

Problem occurring on one disc indicates a problem with the disc.

Problem occurring on multiple discs could indicate a lens cleaner

is needed. The customer can purchase a lens cleaner at any

electronics retailer.

Problem occur when

watching TV program?

YES

Distorted audio from a TV program on a different channel or

input means there is a problem with the television. If a TV program

does have the audio, the problem may be the BD player, the cables

being used, or the TV itself.

Does the problem occur

when DVD is connected to

another TV?

YES

Audio is fine when the BD is connected to

another TV indicates the problem is with the television.

Refer to the owners manual for assistance

with connecting BD to another TV.

Has the customer tried

another set of cables?

Have the customer try another set of cables. A bad cable can

also cause audio problems. Test the cable with another device to

the TV to also determine if the TV is bad. If BD is problem,

please see service chart for service information.

4-2. Distorted Audio

The audio sounds muffled, scratchy, or the audio skips.

Summary of Contents for LHB645


















































































































Search results

Summary of Contents for LHB645

Reviews:

Related manuals for LHB645

Brands by name

Popular brands

LG LHB645, Service Manual

Search results

Summary of Contents for LHB645

Reviews:

Related manuals for LHB645

Brands by name

Popular brands