background image

Safety 

The  instructions  related  to  safety  and  use  indicated  in 
the  this  installation  manual  are  intended  for  the 
prevention of unexpected danger, damage, or failure. 
 

 
 

Non-compliance  with  the  instructions  may  cause 
product  damage,  product  failure,    and/or  serious  bodily 
injury or death. 

 
 

 

 Do  not  contact  electrically  active  parts  of  the  panel, 

such  as  terminals,  without  appropriate  safety  gear. 
Contact may result in lethal spark or electric shock. 

 Do  not  use  or  install  if  the  module  is  broken  or  torn. 

Failure to comply may result  in electric shock

 
 
 
 
 

 
 
 

 Perform  all  work  in  dry  conditions  and  use  only  dry 

tools.  Do  not  handle  wet  panels  without  appropriate 
protection  equipment.  Failure  to  comply  may  result  in 
accident or death. 

 Damaged  modules  must  be  treated  with  safety 

protection  equipment.  Failure  to  comply  may  result  in 
serious bodily injury or death. 

 Do  not  approach  the  damaged  or  broken  module 

unless you are an authorized or qualified expert. Failure 
to comply may result in serious bodily  injury or death. 

 
 
 
 
 

 

 
 

 Use  proper  equipment,  connectors,  wires  and 

buttresses  for  the  installation  of  the  module.  Failure  to 
comply may result in product damage, product failure or 
bodily injury.  

 Installation during rain, heavy wind or snowy day may 

result in bodily injury  or death. 

 Holes  in  the  frame  or  glass  of  the  module  may 

decrease the strength of the frame or break the glass. 

 Do  not  touch  the  glass  surface  or  frame  of  the  solar 

module after installation of the module. It may result in 
injury or death. 

 Heavy  objects  must  be  kept  off  of  the  solar  module. 

Do  not  stand  on  or  step  on  the  module.  Do  not  drop 
the  module.  Failure  to  comply  may  result  in  product 
damage, product failure or bodily injury.  

 

  Do  not  scratch  the  coating  surface  of  the  frame. 

Scratches  may  decrease  the  total  solar  output  due  to 
corrosion of the frame. 

  Do  not  artificially  concentrate  sunlight  on  the  solar 

module surface. Failure to comply may result in product 
damage or failure. 

 Do not apply a shock to the junction box of the module 

or pull the cable. Do not remove the labels attached to 
the module. Failure to comply may result in damage of 
the product. 

 If the installing modules on curved surface, (e. g. arch 

type),  as  shown  in  the  below  picture,  do  not  forcefully 
modify the module in the installation when connecting it 
with  the  structure.  Only  install  the  module  in  the  place 
where  the  structure  for  the  panels    has  been  properly 
set  up.    An  improper  structure  may  cause  deformation 
of  the  panels.  Panels  may  also  be  damaged  by 
unapproved  installation  methods  such  as  the  use  of  a 
crane.  

 

Failure  to  follow  any  and  all  of  the  instructions 
contained  in this installation manual lead to serious 
personal injury, death, property damage, or failure of 
the Solar Module to perform to specifications. 

Summary of Contents for LG S1C-G3 Series












Reviews: