Page 9
Frame Holes
Secure the solar module to the structure using the factory mounting holes.
Four M6 stainless steel bolts, four nuts, four spring washers, and eight plain washers are recommended
per solar module. Refer to Figure 1 for the solar module dimensions and mounting hole locations.
The module may be fastened to a support using the bolt holes in the bottom of the frame at location
‘A’ (refer to Figure 1).
The module should be fastened with M6 bolts, plain washers, spring washers, and nuts for support.
* A gap between the solar module frame and the installation object is necessary for cooling air circu-
lation. Do not seal this gap. The recommended standoff height is a minimum of 4 inches.
Frame Hole(A)
<Figure 1>