18
INSTALLATION
2
Remove the screw (1) from the hinge cover at the
top of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
(2) with a flat-head screwdriver.
3
Remove the cover and pull out the tube (1).
Disconnect all wire harnesses (2). Unscrew the
ground wire (3).
3
4
Rotate the hinge lever counterclockwise (1). Lift
the top hinge (2) free of the hinge lever latch.
(1)
(2)
Hinge Lever Latch
CAUTION
•
When lifting the hinge free of the latch, be careful
that the door does not fall forward.
5
Lift the door from the middle hinge pin and
remove the door.
CAUTION
•
Place the door, inside facing up, on a
nonscratching surface.
NOTE
Disassembling/Assembling the Water Lines
Collet
Tube
Insert line
Clip
(Correct)
Removing the Right Refrigerator
Door
1
Remove the top hinge cover screw (1). Lift
the hook (not visible), located at the bottom of
the front side of the cover (2), with a flat-head
screwdriver.