10
Part Names and Functions
e
Power input jack
Connects to a DC 12 V power supply using proper
cables.
f
Pan adjustment assembly
Use to adjust the panning position.
g
Tilting adjustment assembly
Use to adjust the tilting position.
h
Video Out connector
Supplies analog video signal (composite) to the con-
nected device.
i
Setup menu control buttons
Use these buttons to set the menu options.
BUTTON
Description
UP button
Used to move upper direction on the
menu screen. Use this button to select
an item or adjust the parameters.
DOWN button
Used to move lower direction on the
menu screen. Use this button to select
an item or adjust the parameters.
RIGHT button
Moves the cursor to the right. Used to
increment the value selected in the
menu. The parameter changes each
time this button is pressed.
LEFT button
Moves the cursor to the left. Used to
decrement the value selected in the
menu. The parameter changes each
time this button is pressed.
SET button
Executes selections and displays a sub-
menu for an item with the mark.
j
RESET
button
Push the button more than 3 seconds, this would
restore the factory default settings.
