manualshive.com logo in svg

LG LDP-7004D, User Manual

Share
Download
LG LDP-7004D User Manual Download Page 44

Announcement

7004N/D User Guide | Announcement 43

Listen to Station Number

To check your station number:
1. Press the 

[TRANS/PGM]

button and select option 

[6] ANNOUNCEMENT 

followed by 

option 

[3] LISTEN STA NUMBER. 

2. You will then hear a system message telling you the number of your station.

Listen to Station Status

To listen to your current status (Station Number, COS, Call Forwards):
1. Press the 

[TRANS/PGM]

button and select option 

[6] ANNOUNCEMENT 

followed by 

option 

[4] LISTEN STA STATUS.

2. You will then hear the current status of your extension.

Record Page Message

It is possible to record a page that you may use on a regular basis. This can be stored, 
together with a page code, under a flexible button
1. Press the 

[TRANS/PGM]

button and select option 

[6] ANNOUNCEMENT 

followed by 

option 

[5] REC PAGE MSG. 

2. You will prompted to press 

#

to start recording.

When you have finished recording press              

Summary of Contents for LDP-7004D

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands