manualshive.com logo in svg

LG LDP-7004D, User Manual

Share
Download
LG LDP-7004D User Manual Download Page 39

Wake Up Time/Conference Room

7004N/D User Guide | Wake Up Time/Conference Room 38

Activate Conference Room

Conference Room allows external callers to dial into a multi-party conference. As a user you 
can set up and deactivate a conference room.
1. Press the 

[TRANS/PGM]

button and select option 

[4] TIME/CONF ROOM 

followed by 

option 

[3] ACTIVE CONF-ROOM.

2. Enter the number of the conference room you wish to activate, followed by your 
authorisation code and press the           button.
3. Callers can now dial into this conference (Internal or external via DDI, transfer from 
reception or auto-attendant).

Deactivate Conference Room

A conference room, as set up above, will stay active until you deactivate it.
1. Press the 

[TRANS/PGM]

button and select option 

[4] TIME/CONF ROOM 

followed by 

option 

[4] DEACTIVATE CONF-ROOM. 

(Your screen should look as per 

Fig.45

)

2. Enter the relevant number and press the           button. 

Summary of Contents for LDP-7004D

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands