Instructions for the installer
For operation on 380-415 V 2N~:
use an
H05V2V2 type four-core cable
(4 x 1.5 mm
2
).
For operation on 220-240 V~:
use an
H05V2V2 type three-core cable (3 x 4 mm
2
).
The cable end to be connected to the
appliance must be provided with an earth wire
(yellow-green) at least 20 mm longer.
The manufacturer declines all responsibility for damage to persons
or things caused by non-observance of the above guidelines or
electrical standards or by interference with any part of the appliance.
14.4 Installing the oven
The oven is designed for installing into any piece of furniture as
long as heat-resistant. Follow the dimensions given in Figure
1-2
allowing for a clearance of 80 to 90 mm at the top of the column.
Tighten the four screws
A
inside the frame to secure (Fig.
1
).
The vent B shown in the diagram ensures the air flow required for
the oven cooling fans.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven
door when open.
32
380-415 V 2N~
220-240 V~
(1)
(2)
