- 33 -
Water tap
Valve
Water supply
hose
■
Drain Hose extension kits are available from through your local service centre.
Extend drain Hose as shown below.
Drain Hose Extension
1. Connect the water supply hose to the valve behind dishwasher
and the water tap as shown in figure.
This dishwasher may be fed with either hot or cold water. If the
water can not be maintained below 65°C, the dishwasher must
be connected to cold water.
2. When connecting, the sealing tape or sealing compound should
be used to avoid water leaks.
Make sure that the line is not kinked or sharply bent.
Step 6 : WATER SUPPLY CONNECTION
1. Securely hand tighten supply hose to water supply.
Plug power cord into an earthed power point and switch on.
2. Operate the dishwasher through one cycle (Quick cycle is recommended) to check for water leak
and operating conditions.
Step 7 : FINAL CHECK AND ASSEMBLING
