background image

5

IMPORTANT SAFETY INSTRUCTIONS

 Read all instructions before use

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, 

follow basic precautions, including the following:  

•  Do not use any kinds of solvent in your 

dishwasher. They may cause an 

explosion or fire.

•  Do not spray water on the appliance.  

It may cause the failure of electric parts 

or electric shock.

•  Do not push down or sit on the door 

when the door is opened. It may cause 

damage or failure of your dishwasher.

•  Do not use the detergent for hand 

washing.  

Dishwasher detergent should be used 

for normal operation.

•  This appliance is fitted with a safety 

function that automatically stops the 

operation of the dishwasher when it is 

exposed to abnormal electrical disturbance 

on its mains.

•  Dishwasher detergents are extremely 

alkaline.They can be extremely dangerous 

if swallowed. 

Avoid detergent contact with skin and 

eyes and keep children away from the 

dishwasher when the door is open.  

Check that the detergent dispenser is 

empty after completion of each wash 

cycle.

•  Controls may be locked using Child Lock 

mode to prevent all the settings from being 

changed by a child once the dishwasher is 

in operation.

•  For safety reasons, the Power button will 

still be operative with the Child Lock 

engaged. 

•  Keep children away from detergents 

and rinse-aids.

•  Do not allow children to operate the 

dishwasher.

•  Young children should be supervised 

to ensure that they do not play with the 

appliance.

 Child Safety

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will 

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a cord having an equipment-grounding conductor and 

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed 

and grounded in accordance with all local codes and standards.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

 Save these instructions

Summary of Contents for LD-1481W4













































Reviews: