42
Operation
4
Oper
ation
4
Oper
ation
Alarm Out setting
1. Select one of the alarm out options on the [ALARM
SET] menu.
2. Use [Near] or [Far] button to set it [ON].
3. Press [Open] or [Close] button.
4. Select alarm input number or motion detection. When
the selected alarm input is triggered or motion is
detected, the alarm signal is outputted.
5. Select [DWELL TIME] option and then set the alarm
dwell time. The alarm output is stopped after selected
dwell time.
RESET Setting
.
Information
You can view the current camera information such as PTZ
software version, camera software version, camera ID,
Protocol and Baud Rate.
1. Select [INFORMATION] option on the [RESET] menu.
2. Press [Open] or [Close] button to display the current
camera information.
Initialization
You can initialize the camera settings.
1. Select [INITIALIZATION] option on the [RESET] menu.
2. Press [Open] or [Close] button then confirmation
window is displayed.
3. Select [YES] and press [Open] or [Close] button.
Camera reset
1. Select [CAMERA RESET] option on the [RESET] menu.
2. Press [Open] or [Close] button then confirmation
window is displayed.
3. Select [YES] and press [Open] or [Close] button.
Factory reset
Clear certain settings and information and return to factory
default settings.
1. Select [FACTORY RESET] option on the [RESET] menu.
2. Press [Open] or [Close] button then confirmation
window is displayed.
3. Select [YES] and press [Open] or [Close] button.The
camera will return to the factory default settings.
