Operation
33
4
Oper
ation
-
When the scene is dim.
• AUTO: In this mode, the color temperature range
for the proper white balance is approximately
3 500 K to 6 500 K. Proper white balance may not
be obtained under the following conditions:
-
When the color temperature is out of the 3 500
K to 6 500 K range.
-
When the scene mostly contains high color
temperature objects, such as a blue sky or sun
set.
-
When the scene is dim.
• MANUAL: You can set the white balance options
manually.
-
COLOR TEMP: Use [Near] or [Far] button to
select a function.
› INDOOR: The color temperature range for
the proper white balance is approximately
3 600 K.
› OUTDOOR: The color temperature range for
the proper white balance is approximately
6 500 K.
-
RED: Set the desired red value. (-100 to 100)
-
BLUE: Set the desired blue value. (-100 to 100)
• ONE PUSH: If you select the ONE PUSH mode,
you will be able to set up the White Balance
automatically using [Open] or [Close] button.
Day/Night setting
1. Select [DAY/NIGHT] option on the [CAMERA SET]
menu.
2. Use [Near] or [Far] button to select the mode.
• AUTO: You will be able to change the Day/Night
mode automatically.
-
D/N LEVEL: Use [Near] or [Far] button to select a
level.
-
DWELL TIME: Use [Near] or [Far] button to select
a dwell time.
If you set the AGC to [OFF] or the SHUTTER is set to
one of the SHUTTER options except AUTO on the
[EXPOSURE] menu, the AUTO mode of the DAY/NIGHT
function is not available and [---] mark is displayed.
,
Note
• DAY: Color mode enabled.
• NIGHT: Black-and-white mode enabled.
3D-DNR setting
1. Select [3D-DNR] option. If pictures are not clear due
to brightness, use this function to reduce the noise of
picture.
2. Use [Near] or [Far] button to select a option.
• If you set the AGC to [OFF] on the [EXPOSURE]
menu, the [3D-DNR] function is not available.
• When you use this function, the afterimage may
occur..
,
Note
