manualshive.com logo in svg

LG LCC-K1000, Owner'S Manual, Page: 18 / 24

Share
Download
LG LCC-K1000 Owner'S Manual Download Page 18

18

Pattern Setup and Activation

You will perform the pattern setup and the pattern
play.

Note:

The available patterns differ depending on

camera. So please refer to camera’s manual.

To record the pattern

1. Press the Set Up button then select the [PAT-

TERN] icon.

2. Press SEL.

The sub menu will appear for [PATTERN] setting.

3. Select [Record Pattern] option then press SEL.

The sub menu will appear.

4. Press the PTZ1 or PTZ2 button then use number

buttons to select a camera’s number, if required.

5. Press SEL.

6. Use number buttons to select the pattern index

number then press SEL to confirm. 
Pattern recording starts.

7. Perform desired camera operations by moving the

joystick or pressing In/Out buttons.
The following controls are available for recording
the pattern.
• Panning/Tilting/Zoom control (joystick)
• Zoom control (In/Out buttons)

Note:

Press CLR or Back button if you cancel the

recording during recording a pattern.

8. If you finish to record, press SEL.

The pattern is memorized in the camera’s memory.

9. Repeat steps 3-8 to add additional position.

Note:

The available total time of pattern differs

depending on camera’s operation. When the time is
over, the pattern setup will automatically stop.

Pattern Play

You can activate the pattern play function for the
selected camera.

1. Press the Set Up button then select the [PAT-

TERN] icon.

2. Press SEL.

The sub menu will appear for [PATTERN] setting.

3. Select [Play Pattern] option then press SEL.

The sub menu will appear.

4. Use number buttons to enter the memorized pat-

tern index number then press SEL.
The camera plays the pattern.

5. Press Stop button or move the joystick to stop

playing.

PATTERN

000

PTZ

PATTERN

000

PTZ

[

vV

:

bB

]

[Num]

[Num]

Record Pattern
Play Pattern

[Record Pattern]
Pattern No :

---

   (1 ~ 4)

[Rec. Pattern]
Pattern rec ...

PTZ

000

PTZ

000

PTZ

000

Record Pattern
Play Pattern

[Play Pattern]
Pattern No:   ---
 (1 ~ 4)

[

vV

:

bB

]

[Num]

PTZ

000

PTZ

000

LCC-K1000_AABBLLG_ENG  8/9/05  2:55 PM  Page 18

Summary of Contents for LCC-K1000

























Reviews:

No comments