manualshive.com logo in svg

LG LCC-K1000, Owner'S Manual, Page: 13 / 24

Share
Download
LG LCC-K1000 Owner'S Manual Download Page 13

13

To tour the preset positions

You can tour all preset positions. 

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Preset Tour] option then press SEL.

The sub menu will appear.

4. Press SEL.

All registered preset positions in the camera will
be selected, and the camera position image will be
switched on the active monitor.

5. You can stop the tour by pressing Stop button or

moving the joystick.

To group the preset positions

You can create a group using preset positions that
are registered already. A maximum of 9 group is
available.

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Edit Group] option then press SEL.

The sub menu will appear.

4. Use Arrow (

M

/ 

m

) buttons to select [Preset Index]

option. 

5. Press NUM button then enter the index number

that is already registered.

6. Press SEL. 

The index number is added to the group.

Note: 

A group can contain up to 8 preset num-

bers.

7. Repeat steps 4-6 to additional index number.

Note:

The available groups and indexes differ

depending on cameras. So please refer to cam-
era’s manual.

PRESET

000

PTZ

PRESET

000

PTZ

[

v

:

V

]

[

vV

:

bB

]

Edit Group
Group Tour
Clear Preset

Group Index :

1

Preset Index : ---

PTZ

000

PTZ

000

[Preset Touring]
       Are you sure?

: OK

[

vV

:

bB

]

Set Preset
Go to Preset
Preset Tour

PTZ

000

PTZ

000

SEL

LCC-K1000_AABBLLG_ENG  8/9/05  2:55 PM  Page 13

Summary of Contents for LCC-K1000

























Reviews:

No comments