manualshive.com logo in svg

LG LCC-K1000, Owner'S Manual, Page: 12 / 24

Share
Download
LG LCC-K1000 Owner'S Manual Download Page 12

12

Preset Settings

Preset position is the function to register camera
monitoring positions (preset positions) associated
with position numbers.

By entering the position numbers, you can move
cameras to the preset positions.

Note:

To activate this function, you need to register

the preset positions of combination camera.

To register preset positions

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Set Preset] option then press SEL.

The sub menu will appear.

4. Press the PTZ1 or PTZ2 button then use number

buttons to select a camera’s number, if required.

5. Press SEL.

6. By moving the joystick, move the camera to a

point you wish.

7. Enter a [Index] number you wish to register by

pressing the numeric buttons then press SEL. 
(0-127)

8. Press NUM button then enter a [Speed] (0-127) to

move to the preset position. Then press SEL.

9.

Press NUM button then enter a [Park Time]
(holding time) (1-255). Then press SEL.
The position and its number are memorized for
later recall.

10. Repeat steps 4-9 to add additional position.

Changing to Picture at Preset Position

The following function is available only with cameras
provided with the preset function.
The preset function makes the combination camera
move to the programmed preset position.
It is necessary to program preset positions for the
combination camera beforehand.

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Go to Preset] option then press SEL.

The sub menu will appear.

4. Use number buttons to enter the memorized pre-

set position’s index number then press SEL.
The camera moves to the preset position and the
picture of the camera in that position appears on
the monitor.

PRESET

000

PTZ

[

vV

:

bB

]

Set Preset
Go to Preset
Preset Tour

PTZ

000

[Num]

Index

: - - -

Speed

:

0

Park Time :

0

PTZ

000

PRESET

000

PTZ

[Go To]
Preset Index:  - - -
 (0 ~ 127)

[

vV

:

bB

]

[Num]

Set Preset
Go to Preset
Preset Tour

PTZ

000

PTZ

000

LCC-K1000_AABBLLG_ENG  8/9/05  2:55 PM  Page 12

Summary of Contents for LCC-K1000

























Reviews:

No comments