15
OPERATION
ENGLISH
OPERATION
Before Use
Clean the refrigerator.
Clean the refrigerator thoroughly and wipe off all dust that accumulated
during shipping.
CAUTION
•
Do not scratch the refrigerator with a sharp object or use a detergent
that contains alcohol, a flammable liquid or an abrasive when
removing any tape or adhesive from the refrigerator. Remove
adhesive residue by wiping it off with your thumb or dish detergent.
•
Do not peel off the model or serial number label or the technical
information on the rear surface of the refrigerator.
Open refrigerator doors to ventilate the interior.
The inside of the refrigerator may smell like plastic at first. Remove any
adhesive tape from inside the refrigerator and open the refrigerator doors
for ventilation.
Wait for the refrigerator to cool.
Allow the refrigerator to run for at least two to three hours before putting
food in it. Check the flow of cold air in the freezer compartment to ensure
proper cooling.
CAUTION
•
Putting food in the refrigerator before it has cooled could cause the
food to spoil, or a bad odor to remain inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
