Turning the unit on
Press any other buttons (PWR on the remote
control) except
or EJECT button on the
control panel.
Note
When you insert the disc in the disc slot, the
unit is turned on automatically.
Turning the unit off
Press and hold “VOL” knob (PWR button on
the remote control).
Opening/ Closing the LCD panel
Press the “OPEN/CLOSE” button.
The LCD panel will be opened or closed.
Note
The LCD panel will be closed automatically
with turning the power off.
Inserting a disc
Insert a disc in the disc slot and playback will
start automatically.
Ejecting a disc
Press the “EJECT” button.
The disc is ejected from the loading slot.
Note
If the ejected disc is not removed in approxi-
mately 10 seconds, the disc is automatically
inserted again into the loading slot.
Adjusting the volume
Rotate the “VOL” knob (Press VOL. -/+ buttons
on the remote control to adjust the sound level.
Note
When you turn the unit off, the current volume
level is automatically memorized. Whenever
you turn the unit back on, it will operate at the
memorized volume level.
Mute
Press the “VOL” knob while listening to any
source.
To resume the previous volume level, press
the button again.
Changing the monitor angle
Press the “TILT” button to adjust the LCD
panel to an easily viewable angle.
Each time you press the button, the LCD
panel changes its angle step by step.
Note
The adjusted LCD panel angle will be memo-
rized and the monitor panel will automatically
return to this angle next time the monitor
panel is opened.
Turning the LCD panel horizontal
Press the “FLIP” button.
When the LCD panel is upright and hinders
the operation of the air conditioner, the posi-
tion of the panel can be turned horizontal tem-
porarily.
To return to the original position, press the
“FLIP” button again.
Note
The LCD panel returns to the original position
automatically with beep sounds in 10 seconds
after operation.
16
Basic operation
