Basic operation
12
Install the battery of remote control
Pull the tray on the back of battery of remote control outward
with a pencil or ball point pen and insert the battery with the
plus (+) minus (-) poles pointing in the proper direction.
1
Remove the battery holder with a pencil or ball point pen.
2
Install the battery on the battery holder.
3
Install the battery holder back into its original position.
Using the remote control
Point the remote control in the direction of the front panel to
operate.
Notes
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not going to be
used for a long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control
completely clean and install a new battery.
FLIP
TILT
DISP
OPEN
EJECT
RESET
RESET
If the unit fails to operate properly. press the reset button
using a ball point pen or a similar tool.
Summary of Contents for LAD-9600
Page 54: ...P NO MFL41634213 ...