LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
- 17 -
3.1 General Description
The L704i supports UMTS-800, UMTS-2100, GSM-900, DCS-1800, and PCS-1900 based
GSM/GPRS/UMTS. All receivers and the UMTS transmitter use the radioOne
1
Zero-IF architecture to
eliminate intermediate frequencies, directly converting signals between RF and baseband. The quad-
band GSM transmitters use a baseband-to-IF upconversion followed by an offset phase-locked loop
that translates the GMSK-modulated or 8-PSK-modulated signal to RF.
A generic, high-level functional block diagram of L704i is shown in Figure 1-1. One antenna collects
base station forward link signals and radiates handset reverse link signals. The antenna connects with
receive and transmit paths through a FEM(Front End Module) (plus two duplexers for UMTS high-band
and low-band operations).
1
QUALCOMM’s branded chipset that implements a Zero-IF radio architecture.
3. TECHNICAL BRIEF
Fig 1.1 Block diagram of RF part