Connecting the Display
A3
Important
This illustration depicts the general model of connection. Your product may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the product, ensure that the power to the product, the computer
system, and other attached devices is turned off.
Attaching/Separating the stand base
1
.
Place the product with its front facing downward on a soft cloth.
2
.
Make sure the stand base directs to the sorrect direction(
Front, Rear) and turn the
locking device at the bottom to OPEN to assemble the unit. After assembling the unit, turn
the locking device to LOCK before use.
Turn the locking device to OPEN to separate the stand base.
3
.
Once assembled take the product up carefully and face the front side
4
.
After connecting the cable, adjust the angle of the panel for easy use.
(To connect the cable, see page A5 for reference.)
Tilt Range :
-5˚~20˚
Ergonomic
It is recommended that in order to
maintain an ergonomic and comfortable
viewing position, the forward tilt angle of
the product should not exceed 5 degrees.
-5°
20°
Summary of Contents for L1760TQ
Page 24: ...Digitally yours ...
Page 25: ...Regulatory information Regulatory information ...
