A37
•
DVI-A
analog signal – Press the “Auto Channel”
button in the remote controller to automatically
select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use
the Position OSD menu.
• See if the video card resolution and frequency are
supported by the monitor. If the frequency is out of
range, set to the recommended resolution in the
Control Panel – Display – Setting menu.
•
DVI-A
analog signal – Press the “Auto Channel”
button in the remote controller to automatically
select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use
the Clock OSD menu.
•
DVI-A
analog signal – Press the “Auto Channel”
button in the remote controller to automatically
select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use
the Phase OSD menu.
• See if the Zoom value is set to 0. If it is, you
cannot adjust the H/V Position value.
• If the screen size is not full when connected to the
PC, execute the POP to change to full screen
mode.
• See if the TV sound is set to mono. If it is, the
sound will not be displayed.
• You cannot adjust brightness and tint in the
PIP/POP/PBP Screen menu for the sub-screen
among PIP/POP/PBP menus. Therefore,
brightness can be different for the sub-screen.
Is the screen position wrong?
Do thin lines appear on the
background screen?
Horizontal noise appears or the
characters look blurred.
Unable to adjust the
horizontal/vertical position in the
Zoom menu.
Screen size is automatically adjusted
when connected to the PC.
No sound appears in the TV channel
display window.
Brightness differs in the main and
sub screen when connected to the
PC.
The screen image looks abnormal.
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screensaver
function.
After-image appears when the
monitor is turned off.
After-image appears on the monitor.
Troubleshooting
