LG KOMPRESSOR Follow Me VK9120UHAQ Owner'S Manual Download Page 17

Page: 17 / 20

How to use

How to assemble dust separator

• Insert the air filter and motor safety

filter.

• Close the prefilter cover.

• Close the guide cover.

• Hold the dust separator handle and

put it down to connect it clearly.

• Close the body cover.

CAUTION

Assembling will be conducted in opposite order of separation.

Use the vacuum after assembling the dust separator fully.

CAUTION

• If there is no dust separator or dust

separator is not installed clearly, cover

will not be closed.

• If it is not installed clearly, pull the dust

separator out and re-assemble it.

• Do not operate the vacuum cleaner

when the body cover is not close.

• It can be the cause of malfunction

Click

Summary of Contents for KOMPRESSOR Follow Me VK9120UHAQ





















Search results

Summary of Contents for KOMPRESSOR Follow Me VK9120UHAQ

Reviews:

Related manuals for KOMPRESSOR Follow Me VK9120UHAQ

Brands by name

Popular brands

LG KOMPRESSOR Follow Me VK9120UHAQ, Owner'S Manual

Search results

Summary of Contents for KOMPRESSOR Follow Me VK9120UHAQ

Reviews:

Related manuals for KOMPRESSOR Follow Me VK9120UHAQ

Brands by name

Popular brands