16
How to use
Cleaning air filter and motor safety filter
If suction power is decreased after cleaning dust tank, clean air filter and
motor safety filter.
Air filter and motor safety filter are located at the up of vacuum cleaner in
the above figure.
• Push the body cover button, open the body cover.
• Hold dust separator handle and pull it upward.
• Open the guide cover by pulling the guide cover lever and remove the
dust.
• Open prefilter cover.
• Pull out the air filter and motor safety filter.
• Clean air filter and motor safety filter with running water.
• Do not wash filters with hot water.
• Eliminate water thoroughly
• Dry it under well-ventilated shade for a day.
• The air filter and the motor safety filter should be cleaned as above the
figure.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service Agent.
Wash filters at least once a month.
Motor safety filter
Pre-filter cover
Guide cover
Dust separator
Air filter
WARNING
Dry fully for more than 24 hours in shade.
Summary of Contents for KOMPRESSOR Follow Me VK9120UHAQ
Page 2: ...2 ...
Page 20: ...Made in Korea ...
