LG KG271 Service Manual Download Page 96

Page: 96 / 126

- 97 -

9. ENGINEERING MODE

9.4.1 BB Test

9.4.1.1 Backlight

➀

backlight on : LCD backlight is off.

➁

backlight off : LCD backlight is on.

➂

backlight value : LCD backlight brightness is controlled by 20% from 100 to 0.

9.4.1.2 LCD

➀

LCD color : This menu includes 5 color menu and automatic color change.

5 color menu is Red, Green, Blue, Black and White.

➁

LCD contrast : This menu displays a contrast value and LCD maker.

9.4.1.3 Battery Info

This menu displays the information of battery, as example battery voltage level and temperature.

In line 2, battery voltage level is displayed with average and instant value.

In line 3. battery temperature value is displayed, but this value is ADC value.

In line 4. Icon number of battery voltage is displayed.

9.4.1.4 Vibrator

This menu can control vibrator on and off operation.

9.4.1.5 Audio

This menu can control MIDI operation

Summary of Contents for KG271































































































































Search results

Summary of Contents for KG271

Reviews:

Related manuals for KG271

Brands by name

Popular brands

LG KG271, Service Manual

Search results

Summary of Contents for KG271

Reviews:

Related manuals for KG271

Brands by name

Popular brands