- 90 -
LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. TROUBLE SHOOTING
4.6.2 Checking WCDMA PAM Control Block
1.
PWR_DET : UMTS Tx Power Detected value (Check R101)
2.
TX_AGC_ADJ : UMTS RTR6275 Tx Amp Gain Control
3.
+VPWR : UMTS PAM Main Voltage ( 3V < +VPWR < 4.2V)
4.
PA_ON : Enable W2100 band (C159)
5.
PA_R1 : Control signals that step the active PA mode and bias
z
PAM control signal
[Fig 4.6.2.1] Test point of the WCDMA PAM Block
WCDMA PAM(W2100)
WCDMA Coupler
WCDMA Tx
Saw Filter
PA_ON: W2100 Enable
(check C159)
+VPWR
Bottom side
Bottom side
PA_R1(check C158)