57
Reference
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned down
the volume.
1. Press FM/AM on the remote control until FM or AM
appears in the display window.
2. And then every time you press FM/AM, FM and
AM changes alternately.
3. Press and hold TUN.- or TUN.+ on the remote
control for about three seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
4. Press ENTER on the remote control.
A preset number will flash in the display window.
5. Press PR + or - on the remote control to select the
preset number you want.
6. Press ENTER on the remote control.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press
TUN.-
or
TUN.+
repeatedly in step 3 to tune in
the station manually.
To clear all the stored stations
Press and hold ENTER for about five seconds to clear
all the stored stations.
Listening to the Radio
Preset radio stations in the unit’s memory first (see
“Presetting radio stations” on the left).
1. Press FM/AM until AM or FM appears in the
display window.
The last received station is tuned in.
2. Press PR + or - repeatedly on the remote control
to select the preset station you want.
Each time you press this button, the Recorder Receiver
tunes in one preset station at a time.
3. Adjust the volume by pressing VOL + or VOL-
on the remote control repeatedly.
To turn off the radio
Press POWER to turn the Recorder Receiver off or
select another function mode (DVD, AV 1, AV 2 etc.,).
To listen to non-preset radio stations
Use manual or automatic tuning.
For manual tuning, press TUN.- or TUN.+ on the
remote control repeatedly.
For automatic tuning, press and hold TUN.- or
TUN.+ on the remote control for about three
seconds on the remote control.
For your reference
If an FM program is noisy
Press AUDIO/MO.ST. repeatedly on the remote
control so that “STEREO” changes to MONO in the
display window. There will be no stereo effect, but
the reception will improve. Press this button
repeatedly again to change “MONO” to “STEREO”.
To improve reception
Reorient the supplied antennas.
