29
Adjust the lock settings
To access the Lock System or DTV Rating, you must enter the 4-digit
password. If a password is not set on this unit, you must set the
password in the Disc Setup settings (page 42).
If not, Lock System and DTV Rating are not activated.
If you do not remember your password, refer to the "If you forget
your password" on page 42.
Lock System –
Allows you to set up specific programs and ratings through
blocking schemes. Also allows you to activate or disable all of the lock
schemes previously set up. A password is required to gain access to the
lock menu options. When the Lock System is set to [OFF], the [DTV
Rating] is not effective.
DTV Rating –
You can set the rating to block out all the programs with rat-
ing above a specified level.
[No Control]: You can view all programs.
[04 Years] – [18 Years]: Rating [04 Years] has the most restrictions and
[18 Years] is the least restrictive.
[Lock All]: All programs are locked. To view a program, you must input
the 4-digit password you have created.
Adjust the recording settings
Rec Mode Set –
Select the picture quality for recording from XP, SP, LP,
EP or MLP. See recording time of each mode on page 63.
[XP]: Highest picture quality.
[SP]: Standard picture quality.
[LP]: Slightly lower picture quality than [SP] mode.
[EP]: Low picture quality.
[MLP]: The longest recording time with the lowest picture quality.
Rec Aspect –
This option sets the recording aspect ratio to suit the materi-
al you are recording on HDD.
TV Rec Audio –
Select an audio channel to record when recording a bilin-
gual program.
[Main+Sub]: Main language and sub language
[Main]: Main language only
[Sub]: Sub language only
AV2 Recording –
Selects a method of inputting video signals for the
AV2(DECODER) jack. The picture will not be clear if this setting does not
match the type of the video input signal.
[Auto]: The video input signal will automatically follow the video signal
received.
[CVBS]: Inputs CVBS(composite) video signals.
[RGB]: Inputs RGB signals.
[S-VIDEO]: Inputs S-Video signals.
Time Shift –
Set this option to [ON] make this unit to use the Time Shift
function automatically without pressing TIME SHIFT button. The timeshift
will start in 5-10 seconds after TV tuner mode is started.
HR407M-P_BGBRLLK_ENG 8/9/04 4:49 AM Page 29
