background image

ii

This unit uses CD-ROM discs with the following mark

When you use this unit as a CD player, use compact
discs with the following mark

This unit uses CD-R discs with the following mark.

This unit uses CD-RW discs with the following mark.

This unit uses High Speed CD-RW discs with the 
following mark

This unit uses Ultra Speed CD-RW discs with the 
following mark.

WARNING:

Only drives bearing the logo 

Compact Disc ReWritable Ultra Speed

can write or

erase Ultra Speed CD-RW media.

Ultra Speed CD-RW Media may be recognized by the same 

Compact Disc ReWritable Ultra

Speed

logo on the disc label or packaging material.

Attempting to write to Ultra Speed CD-RW media using CD-RW drives NOT bearing the logo

Compact Disc ReWritable Ultra Speed

may result in data loss.

Recordable

ReWritable

ReWritable

High Speed

ReWritable

Ultra Speed

This product is manufactured to comply with the radio interference requirements of
EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

CAUTION - INVISIBLE LASER RADIATION WHEN OPEN, AVOID EXPOSURE TO BEAM.

VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN ÄR

FARLIG.

CLASS 1

LASER PRODUCT

KLASSE 1

LASER PRODUKT

LUOKAN 1

LASER LAITE

KLASS 1

LASER APPARAT

CLASE 1

PRODUCTO LÁSER

CLASSE 1

PRODOTTO LASER

Summary of Contents for GSA-4082B















Reviews: