7
Connecting the Sound Card
If the computer is using a sound card, the drive is connected to the sound card with an audio
cable. The supplied analog audio cable fits most sound cards or one can be purchased at a local
computer store.
When using Windows 98/2000 Professional/Me/XP Home Edition/XP Professional, no special
device driver is required. Your system, upon Power On and bootup after installing and connecting
the new Super Multi DVD Drive, will recognize and load native software drivers automatically.
Please consult the following internet sites:
http://www.lgservice.com (then choose your country from the list)
For Windows 98/2000/ME/XP Users
■
In order to ensure normal drive operation, please check the following:
• The drive is displayed in
Windows 98/ME : [Control Panel]-[System]-[Device Manager]-[CD-ROM]
Windows 2000/XP : [Control Panel]-[System]-[Hardware]-[Device Manager]-[DVD/CD-ROM-drives]
• 32-bit is displayed in [Control Panel]-[System]-[Performance]
■
If the drive is not recognized by your computer, please check the following items.
• If an
indicator is displayed on the IDE controller in [Control Panel]-[System]-[Device
Manager]-[Hard Disk Controller], you will need to contact your PC’s manufacturer or the
motherboard’s manufacturer and get the appropriate IDE controller driver.
■
Run
Add New Hardware
in Control Panel to let PC search again for new device.
Replacing the Computer Cover
When the installation of the drive unit is
complete, replace the computer cover
Device Drivers
Refer to the manual for the sound card
for detailed information regarding this
connection.
R GND L
C.SEL
SLAVE
MASTER
39
40
5V
GND
12V
AUDIO OUT
SELECT
IDE INTERFACE CONNECTOR
CD INPUT
1
2
L
R
AUDIO O
UT
SELECT
IDE INT
ERFA
39
40
R GND
L
C.SEL
SLAVE
MASTE
R
marking L-R
Sound card
