background image

7

Connecting the Sound Card 

If the computer is using a sound card, the drive is connected to the sound card with an audio
cable. The supplied analog audio cable fits most sound cards or one can be purchased at a local
computer store.

When using Windows 98/2000 Professional/Me/XP Home Edition/XP Professional, no special
device driver is required. Your system, upon Power On and bootup after installing and connecting
the new Super Multi DVD Drive, will recognize and load native software drivers automatically.

Please consult the following internet sites:

http://www.lgservice.com (then choose your country from the list)

For Windows 98/2000/ME/XP Users

In order to ensure normal drive operation, please check the following:
• The drive is displayed in

Windows 98/ME : [Control Panel]-[System]-[Device Manager]-[CD-ROM]
Windows 2000/XP : [Control Panel]-[System]-[Hardware]-[Device Manager]-[DVD/CD-ROM-drives]

• 32-bit is displayed in [Control Panel]-[System]-[Performance]

If the drive is not recognized by your computer, please check the following items.
• If an 

indicator is displayed on the IDE controller in [Control Panel]-[System]-[Device

Manager]-[Hard Disk Controller], you will need to contact your PC’s manufacturer or the
motherboard’s manufacturer and get the appropriate IDE  controller driver.

Run 

Add New Hardware

in Control Panel to let PC search again for new device.

Replacing the Computer Cover

When the installation of the drive unit is 
complete, replace the computer cover

Device Drivers

Refer to the manual for the sound card
for detailed information regarding this
connection.

R    GND   L

C.SEL

SLAVE

MASTER

39
40

5V

GND

12V

AUDIO OUT 

SELECT 

IDE  INTERFACE  CONNECTOR

CD INPUT

1
2

L

R

AUDIO O

UT

SELECT

IDE  INT

ERFA

39
40

R GND

 L

C.SEL

SLAVE

MASTE

R

marking L-R

Sound card

Summary of Contents for GSA-4081B















Reviews: