LG GS205, Service Manual

Page: 137 / 196

-137-
Key Type Input Type Operation Condition Followed
Section
0-9 P Input numbers (1)
*,#
↑
,Side
↑
P Scroll up one item.
↓
,Side
↓
P Scroll down one item.
←
P Move cursor to one left position (1)
→
P Move cursor to one right position (1)
LSK “Edit” R Go to Echo String screen. (2)
RSK ”Back” R Go back to Socket Test menu (3) 1.11.1
RSK “Done” R Pop up confirm window (4)
SEND
END LP Power off phone.
END P Go to Idle screen.
Input Type: P=Press, R=Release, LP=Long Press
Condition: (1) Inline item of input of Server IP is highlighted.
(2) Inline item of input of Echo String is highlighted.
(3) No input characters
(4) Input characters exist
1.12.4.3. Interrupt Handling
Interrupt Type Corresponding Operation Operation after Interrupt Handling
Incoming Call Standard handling Restore the screen before the interrupt.
Incoming CCBS Invoke Standard handling Restore the screen before the interrupt.
Incoming SMS Standard handling Restore the screen before the interrupt.
Incoming Voice Mail Standard handling Restore the screen before the interrupt.
Incoming CB Message Standard handling Restore the screen before the interrupt.
Charger Plug In Standard handling Restore the screen before the interrupt.
Earphone Plug In Standard handling Restore the screen before the interrupt.
Alarm Expired Standard handling Restore the screen before the interrupt.
Battery Low Standard handling Restore the screen before the interrupt.
Incoming SS Standard handling Restore the screen before the interrupt.
Incoming NITZ Standard handling Restore the screen before the interrupt.
1.12.4.4. Detailed Description
When the user selects the ECHO submenu item from the Socket Test menu, the ECHO
screen appears and prompts the user to input an echo server IP and echo string.
When the Server IP inline item is highlighted, the user can enter the echo server’s IP
address.
When the Echo String inline item is highlighted, the user can press LSK EDIT to enter the
Echo String screen to input string to be echoed.
1. If no characters are input, RSK is labeled BACK and pressing RSK returns the user to
Socket Test menu.
2. If input characters exist, RSK is labeled DONE and pressing RSK invokes a confirmation
window.
In the Echo String screen, the user inputs the string to be echoed back from the server.
1. If no characters are input, RSK is labeled BACK and pressing RSK returns the user to the
ECHO Screen.
2. If input characters exist, RSK is CLEAR and pressing RSK deletes one single character at
the location of the cursor.