34
EN
Symptoms
Reason
Solution
The appliance is
noisy and generates
abnormal sounds.
Is the appliance installed on a
weak floor or improperly
leveled?
•
Install the appliance on a solid and
flat area.
Does the rear of the appliance
touch the wall?
•
Adjust the installation position to
allow enough clearance around the
appliance.
Are objects scattered behind
the appliance?
•
Remove the scattered objects from
behind the appliance.
Is there an object on top of the
appliance?
•
Remove the object on top of the
appliance.
The side or front of
the appliance is
warm.
There are anti condensation
pipes fitted to these areas of
the appliance to reduce
condensation forming from
around the door area.
•
The heat releasing pipe to prevent
condensation is installed on the front
and side of the appliance. You may
feel it particularly hot right after the
appliance is installed or during the
summer. You can be assured that
this is not a problem and is quite
normal.
There is water inside
or outside of the
appliance.
Is there water leakage around
the appliance?
•
Check if the water has leaked from a
sink or another place.
Is there water on the bottom of
the appliance?
•
Check if the water is from the
thawed frozen food or a broken or
dropped container.
The automatic
icemaker does not
produce ice or
produces a small
amount of ice.
Did you install the appliance
recently?
•
The ice maker produces ice normally
when approximately 48 hours have
passed after the appliance is
installed.
Did you connect the water
supply pipe to the appliance
and open the supply valve?
•
Connect the water supply pipe to the
appliance and open the supply valve
completely.
Is the water supply hose bent?
•
If the water supply hose is bent, the
water flow could be compromised.
Have you dispensed a large
amount of ice recently?
•
It takes approximately 24 hours to
produce more ice in the automatic
icemaker. Please wait.