23
EN
Notes for Using the Control Panel
•
The control panel will turn on in any of the
following cases.
−
When the power is turned on
−
When a button is pressed
−
When the appliance door (fridge
compartment, freezer compartment, door in
door) is opened
•
The control panel will turn off automatically for
energy saving in any of the following cases.
−
When one minute has passed after turning
on the power
−
When no button operation is carried out for
20 seconds after a desired button is pressed
−
When 20 seconds has passed after the
appliance door (fridge compartment, freezer
compartment, door in door) is opened and
closed
•
If there is any finger or skin contact to the
control panel while cleaning it, the button
function may operate.
Setting the Temperature
This sets the fridge temperature or freezer
temperature.
•
Press the
Fridge
button or
Freezer
button to
adjust the temperature.
•
The initial temperature is set.
−
Fridge : 4 °C
−
Freezer : -19 °C
•
The temperature can be adjusted.
−
Fridge : from 1 °C to 7 °C
−
Freezer : from -14 °C to -24 °C
•
The actual inner temperature varies
depending on the food status, as the indicated
setting temperature is a target temperature,
not actual temperature within the appliance.
NOTE
•
The default temperature setting may vary
depending on the appliance.
•
Wait until two or three hours have passed
after connecting the appliance to the outlet
before storing food in the appliance.
Setting Express Freeze
The function can quickly freeze a large amount
of ice or frozen foods.
•
When you press the
Express Freeze
button,
the
Express Freeze
icon lights on the control
panel.
•
The function is enabled and disabled in turn
each time you press the button.
•
The Express Freeze function automatically
terminates after a specific period has passed.
Setting and Resetting Lock
This locks the buttons on the control panel.
•
Press and hold the
Lock
button for 3 seconds
. When the Lock function is set, all buttons are
locked.
•
When you press the
Lock
button for 3
seconds, the
Lock
icon on the control panel
lights. The function is enabled and disabled in
turn each time you press the button.
•
If you press a button other than lock when the
lock is set, the button will not function.
•
When you press a button other than lock
when the lock is set, the
Lock
icon on the
control panel will flash 3 times.
•
To change a setting, first press the
Lock
button for three seconds to disable the
function.
