11
HOW TO REMOVE AND INSTALL REFRIGERATOR DOOR
1. Removing Refrigerator Doors
NOTE:
Handle, top hinge and hinge cover appearance may vary from illustrations on this page.
WARNING
•
Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious
injury.
•
Do not put hands or feet or metal sticks into the air vents, base grille, or bottom of the refrigerator. You may be
injured or receive an electrical shock.
•
Be careful when you work with the hinge, base grille, and stopper. You may be injured.
Left Door
•
Open the door. Remove the top hinge cover screw (1 ).
•
Use a flat blade screwdriver to lift the tabs on the front underside of the cover(2). Lift up the cover.
•
Disconnect all wire harness (3).
•
Remove the grounding screw(4).
•
Rotate hinge lever (5) counterclockwise. Lift the top hinge (6) free of the hinge lever latch (7).
•
Place the door on a non-scratching surface with the inside up.
Right Door
•
Open the door. Remove the top hinge cover screw (8).
•
Use a flat blade screwdriver to lift the tabs on the front underside of the cover (9). Lift up the cover.
•
Rotate hinge lever (10) clockwise. Lift the top hinge (11) free of the hinge lever latch (12).
•
Place the door on a non-scratching surface with the inside up.
CAUTION:
When lifting the hinge free of the latch, be careful that the door does not fall forward.
•
Lift the door from the middle hinge pin and remove the door.
•
Place the door, inside facing up, on a nonscratching surface.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)(11)
(12)
REFRIGERATOR INSTALLATION
Summary of Contents for GM63BGS
Page 34: ...NOTES ...
Page 35: ...NOTAS ...