background image

P/NO: 3828HM1043A  

Ver. A

Website : http//www.LGservice.com

Caution!

The disc rotates at high speed in the drive unit.
Use of worn, damaged, or non-standard CD-ROM discs
can only adversely affect the drive and cause the disc to
shatter or crush while in use.
Disc crush can only occur when you use a damaged 
CD-ROM disc in the drive. It is an extremely rare 
occurrence, but there are steps which can be taken to
prevent it.

Always check your discs before inserting them into
the drive.

1. Take care not to use worn, cracked, damaged,

warped or poor quality CD-ROMs, as this may
cause damage to your drive.

2. Check the clear plastic on the center of the disc,

cracks here are the main cause of disc crush.

3. Do not play CD-ROMs which are a non-standard

(I.e. non-circular)shape, such as heart shaped
discs,
or discs in the shape of a business card.

How can you keep your discs from becoming  
damaged?

1. When not in use, remove discs from the drive.
2. Keep discs in the packaging supplied with them

and out of direct sunlight and away from heat
sources.

Excessive vibration or a sudden jolt to the drive during
operation may cause a malfunction.
Avoid exposing the drive to sudden changes in 
temperature as it may cause condensation to collect
inside the drive.

Copyright © 2003   

LG Electronics U.S.A. Inc.
1000 Sylvan Ave.
Englewood Cliffs NJ 07632 
U. S. A.
or http://www.lgeus.com

LG Electronics Canada Inc.
550 MATHESON Blvd. East Mississauga.
Ontario L4Z4G3 Canada

LG Electronics Deutschland GMBH
Jakob-Kaiser-Straße 12,
D-47877 Willich, Germany

LG Electronics U. K. Ltd.
LG House, 264 Bath Road,
Slough Berkshire SL1 4DT
United Kingdom

Goldstar France E.U.R.L
Paris Nord II 22, Avenue des 
Nations-B.P.50372 VILLEPINTE 
95945 ROISSY CDG CEDEX France 

LG Electronics Italia S.P.A.
Centro Direzione “IL Quadrate” Via 
Modigliani, 20090 Segrate (MI) Italy

LG Electronics España
Complejo Europa Empressaries (Edif.Bruselas)
Ctra. N-VI 28230 Las Rozas Madrid Spain  

LG Electronics Australia Pty Ltd.
23, pike st Rydalmere NSW 2116 
or http://www.lge.com.au

©

2003 Made by

Summary of Contents for GCR-8522B


























Reviews: