background image

Connecting 

to a television and satellite receiver

The information given here refers to the two most common forms of connection. Make sure that all the appliances 
are unplugged from the mains power, before making any connections to avoid causing damage to your equipment.
Using a SCART cable to connect your appliances will give you the best sound and picture quality.

4

Connection guide

Roof aerial

Your outside aerial should be 
connected to the 

AERIAL

socket 

of your Video Recorder. 

Coaxial cable

If you are using the coaxial cable a 
connection needs to be made from the

RF.OUT

socket on your Video Recorder

to the aerial socket on your television.

SCART socket

If you have a 

SCART

socket 

connection on your television you can
connect the television’s SCART socket
to the 

EURO AV 1

socket on the back

of the Video Recorder.

Satellite receiver

Your Satellite Receiver should attach
using a 

SCART

cable to the 

EURO AV 2

socket on the back 

of the Video Recorder.

Tune a video channel

If you are using a SCART connection
then the video picture will be shown on
the AV channel of your television.

If you are using a Coaxial cable you
need to select a TV channel on your
Television and tune it to the Video 
Recorder signal, a bright blue screen. 
Please consult your Television User
Guide for information on how to do this.

If you have trouble attaining a good 
picture it may be that the output 
frequency of the Video Recorder 

(UHF 22)

is already in use by your 

television. To change this: 

Press 

POWER

on the Remote

Control to put the Video Recorder on
standby then press and hold 

PROG.

3

or 

4

on the front of your VCR for more

than 4 seconds. 

RF CHANNEL 22

will

appear on your television screen. 
Press 

PROG.

or 

4

on the Video

Recorder to select another frequency
channel. Select any number between

22

and 

68

. Tune as normal.

You can also set it to “OFF” if there is
any interference when your TV is 
connected to the VCR with a SCART
cable.

Satellite receiver
(not supplied)

Roof aerial 
(not supplied)

Coaxial 
cable

SCART 
cable

Television
(not supplied)

Video Recorder

You should use either a 
Coaxial connection or a
SCART connection
between your Video
Recorder and Television. 

SCART

sockets

Audio sockets

(For Hi-Fi)

Aerial IN

RF out

GC985/967NP1 NA4ULL-ENG  3/17/04  9:00 AM  Page 4

Summary of Contents for GC967NP1


















Reviews: