LG G7200, User Manual

Page: 67 / 109

G7200 User Guide
23
Getting started
G7200 User Guide
22
Getting started
Turning your phone ON
1. Install a battery to the handset and connect the phone to an
external power source such as the travel adapter, cigarette lighter
adapter or hands-free car kit. Or install a charged battery pack to
the handset.
2. Press for a few seconds until the LCD screen is turned on.
3. Depending on the status of the PIN code request setting you may
need to enter your PIN code.
Turning your phone OFF
1. Press for a few seconds until the LCD screen is turned off.
You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK and
PUK2 codes) can be changed by using the
Change codes feature
[Menu 9-4-4]. See page 91.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card
against unauthorised use. The PIN code is usually supplied with the
SIM card. When the
PIN code request is set to Enable , your phone
will request the PIN code every time the phone is switched on. When
the
PIN code request is set to Disable , your phone connects to the
network directly without the PIN code.
Note
Like any other radio devices, avoid any unnecessary contact with
the antenna while your phone is on.
Disconnecting the adapter
1. When charging is finished, the moving bars of the battery icon stop
and ‘Full’ is displayed on the screen.
2. Unplug the adapter from the power outlet. Disconnect the adapter
from the phone by pressing the grey tabs on both sides of the
connector and pull the connector out.
Note
• Ensure the battery is fully charged before first using the phone.
• Do not remove the battery or SIM card while charging.
• In the case the battery is not properly charged, please turn the
phone off and on using the power key, then recharge the battery.
After detaching and reattaching the battery, please recharge the
battery.
Turning your phone on and off
Access codes