46
OPERATION
5
Open the door after it unlocks itself
and add or remove necessary
clothing items.
6
Close the door and press the
Start/
Pause
button.
NOTE
• For safety reasons, the door remains
locked when the water level or
temperature inside of the drum is
high. It is not possible to add clothes at
this time.
Delay End
You can set this function so that the
appliance starts automatically and
finishes after a specified time interval.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Delay End
button as
necessary.
4
Press the
Start/Pause
button.
NOTE
• Except for LED of the
Delay End
button, all LEDs on the control panel
will be turned off within 20 minutes.
This feature may vary depending on
the model purchased.
• The delay time is the time to the end of
the programme, not the start. The
actual running time may vary due to
water temperature, clothes and other
factors.
• To cancel the function, the
Power
button should be pressed.
• Avoid using liquid detergent for this
function.
Using the ezDispense
Use the
Dispenser 1
and
Dispenser 2
buttons to set up and control the
ezDispense
function.
a
Dispenser 1
button
b
Dispenser 2
button
c
Liquid detergent indicator
d
Link indicator (Using only liquid
detergent both compartments)
e
Liquid fabric softener indicator
NOTE
• When the detergent or softener is
insufficient;
- In case of pressing the
Power
button: The LED will blink and the
chime will sound.
- In case of running the appliance: The
LED will blink.
• The default settings are configured to
dispense the detergent of
Dispenser 1
and the fabric softener of
Dispenser 2
.
global_main.book.book Page 46 Tuesday, May 25, 2021 11:26 AM
Summary of Contents for FWV1117BTSA
Page 74: ...Memo global_main book book Page 73 Tuesday May 25 2021 11 26 AM ...
Page 75: ...Memo global_main book book Page 74 Tuesday May 25 2021 11 26 AM ...
Page 76: ...Memo global_main book book Page 75 Tuesday May 25 2021 11 26 AM ...
Page 77: ...global_main book book Page 73 Tuesday May 25 2021 11 26 AM ...