background image

A1

Introduction

Thank you for purchasing a high resolution monitor. It will give you high
resolution performance and convenient reliable operation in a variety of
video operating modes.

Features

The monitor is a 17 inches (16.0 inches viewable ) intelligent, microprocessor
based monitor compatible with most analog RGB (Red, Green, Blue) display
standards, including IBM PC

®

, PS/2

®

, Apple

®

, Macintosh

®

, Centris

®

, Quadra

®

, and

Macintosh II family.

The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA,
and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible
color video cards when used with the appropriate adaptor. The monitor's wide
compatibility makes it possible to upgrade video cards or software without
purchasing a new monitor.

Digitally controlled auto-scanning is done with the micro-processor for horizontal
scan frequencies between 30 and 70kHz, and vertical scan frequencies
between 50-160Hz.

This monitor is capable of producing a maximum horizontal resolution of 1280
dots and a maximum vertical resolution of 1024 lines.

The microprocessor-based digital controls allow you to adjust conveniently a
variety of image controls by using the OSD (On Screen Display). 

On Screen Display (OSD) adjustments in 11 languages:
English, German, French, Spanish, Italian, Swedish, Finnish, Portuguese,
Korean, Chinese and Russian.

Plug and play capability if supported by your system.

This monitor has DDC 2B function.

*

Compliant with the following regulated specifications :

*

- EPA E

NERGY

S

TAR

- Swedish MPRII
- Swedish TCO’99

ENGLISH

*

For detailed information, please refer to the 

Reference Guide

provided .

Summary of Contents for Flatron 776FM














Reviews: