LG F4J7JS(P)(0~9)W/S Owner'S Manual Download Page 40

Page: 40 / 48

Symptoms

Reason

Solution

Water in the

washing machine

does not drain or

drains slowly

Drain hose is kinked or clogged.

•

Clean and straighten the drain hose.

The drain filter is clogged.

•

Clean the drain filter.

Washing

machine does

not start

Electrical power cord may not be

plugged in or connection may be

loose.

•

Make sure plug fits tightly in wall

outlet.

House fuse blown, circuit breaker

tripped,or a power outage has

occurred.

•

Reset circuit breaker or replace fuse.

Do not increase fuse capacity. If

problem is a circuit overload, have it

corrected by a qualified electrician.

Water supply tap is not turned on.

•

Turn on water supply tap.

Washing

machine will not

spin

Check that the door is firmly shut.

•

Close the door and press the

Start/

Pause

button. After pressing the

Start/Pause

button, it may take a

few moments before the washing

machine begins to spin. The door

must be locked before spin can be

achieved. Add 1 or 2 similar items to

help balance the load. Rearrange

load to allow proper spinning.

Door does not

open

Once washing machine has started,

the door cannot be opened for

safety reasons.

•

Check if the ‘Door Lock’ icon is

illuminated. You can safely open the

door after the ‘Door Lock’ icon turns

off.

Wash cycle time

delayed

If an imbalance is detected or if the

suds removing programme is on,

the wash time will increase.

•

This is normal. The time remaining

shown in the display is only an

estimate. Actual time may vary.

Fabric softener

overflow

Too much softener may cause an

overflow.

•

Follow softener guidelines to ensure

appropriate amount is used. Do not

exceed the maximum fill line.

Softeners

dispensed too

early

Too much softener may cause an

premature dispensing.

•

Follow the guidelines provided by the

detergent manufacturer.

•

Close the dispenser drawer slowly.

Do not open the drawer during the

wash cycle.

The buttons may

not function

properly.

The button cannot be recognized

when the door is open.

•

Press again after closing the door.

Summary of Contents for F4J7JS(P)(0~9)W/S

















































Search results

Summary of Contents for F4J7JS(P)(0~9)W/S

Reviews:

Related manuals for F4J7JS(P)(0~9)W/S

Brands by name

Popular brands

LG F4J7JS(P)(0~9)W/S, Owner'S Manual

Search results

Summary of Contents for F4J7JS(P)(0~9)W/S

Reviews:

Related manuals for F4J7JS(P)(0~9)W/S

Brands by name

Popular brands