21
EN
NOTE
•
Do not let the detergent harden. Doing so may
lead to blockages, poor rinse performance or
odour.
•
Full load : According to manufacturer’s
recommendation.
•
Part load : 3/4 of the normal amount
•
Minimum load : 1/2 of full load
Adding Detergent and Fabric
Softener
Adding Detergent
•
Main wash only →
•
Pre wash+Main wash →
NOTE
•
Too much detergent, bleach or softener may
cause an overflow.
•
Be sure to use the appropriate amount of
detergent.
Adding Fabric Softener
•
Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the
fabric softener, which may stain clothes. Close
the dispenser drawer slowly.
•
Do not leave the fabric softener in the
detergent drawer for more than 2 days (Fabric
softener may harden).
•
Softener will automatically be added during
the last rinse cycle.
•
Do not open the drawer when water is being
supplied.
•
Solvents (benzene, etc.) must not be used.
NOTE
•
Do not pour fabric softener directly on the
clothes.
Adding Water Softener
•
A water softener, such as anti-limescale (e.g.
Calgon) can be used to cut down on the use
of detergent in extremely hard water areas.
Dispense according to the amount specified
on the packaging. First add detergent and
then the water softener.
•
Use the quantity of detergent required for soft
water.
Summary of Contents for F4J7JS(P)(0~9)W/S
Page 47: ...Memo ...
Page 48: ......