ENGLISH
28
»
Type of Connector: D-Sub 9-Pin Male
Male connector on box, viewed towards connector.
1
5
6
9
No.
Signal
Signal requirements
1
VCC
2
RX RS232
Standard RS232 specification
3
TX RS232
Standard RS232 specification
4
IR from TV
5
GND
Power ground
6, 8
Not connected
7
2 A
+5 V DC 10 %, max 100 mV ripple
9
1.5 A
+12 V DC 10 %, max 100 mV ripple
One Channel Map
(Depending on model)
•
If ‘One Channel Map’ is ‘Enable’, the TV will operate as below.
-
A. When the TV is auto-scanning, it searches both air and cable channels.
-
B. User can assign a channel number him/herself by manual scan.
-
C. In 'Programme Edit’ window, all channels are shown in a single list regardless of input source.
-
D. Automatically scanned channels may not have the user-desired channel numbers.
•
If user change the ‘Enable/Disable’ value, an pop-up window will be displayed to warn that all channel information will be deleted. The Default
value is ‘Enable’.
DTV Programme Update
•
It is a mode to set whether to update DTV programme automatically or not.
•
When DTV Programme Update is set to ’Auto’, the function to update TV’s programme map according to dtv programme’s stream information.
•
DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though DTV programme’s information is changed.
On Timer Operation
•
It is a mode to select
Timer Power On
working one time or repeatedly.
•
'Once': ‘
Timer Power On
’ in the user menu operates only one time when the
Timer Power On
menu is set to
On
.
•
‘Repeat’ : ‘
Timer Power On
’ operates repeatedly when the
Timer Power On
menu is set to
On
.
Radio Name Display
•
Instead of “Audio Only”, the name of a radio programme is displayed on the screen when a radio broadcast is playing.
•
Set to On (Work) or Off (Do Not Work).
•
If the setting is “On”, the name of a radio programme is displayed for the radio programme.
•
If the setting is “Off”, the text “Audio Only” is displayed for the radio programme.
USB Auto Playback
(Depending on model)
•
When ‘USB Auto Playback’ is set to ‘Movie’, TV finds and plays the USB’s movie files located at the root(top) directory Movies if USB is plugged in.
•
When ‘USB Auto Playback’ is set to ‘Photo’, TV finds and plays the USB’s photo files located at the root(top) directory Photos if USB is plugged in.
•
If it reaches the last file, it starts the first file again
