background image

Information

36

Replacing the Lamp

Lamp Replacement

Be careful when replacing lamp

The change interval of lamp may depend on the use environment of Projector. You
can see the used lamp time in the CHECKING LAMP TIME section of the Menu
(page.27). You must replace the lamp when:

The projected image gets darker or starts to deteriorate.

The lamp indicator is red.

The message “Replace the lamp” appears on the screen when turning the
projector on.

- Press the POWER button on the control panel or remote control to turn off power.
- If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation indicator LED 

is lit up constantly (orange).

- Allow the lamp to cool for 1 hour before replacing it.
- Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers lamp may

cause damage to the Projector and lamp.

- Pull out the lamp only when replacing the lamp.
- Keep the lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves etc.
- To reduce the risk of fire do not expose the lamp to liquids or foreign materials.
- Do not place the lamp near any heat source.
- Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there  could be an increased

risk of fire.

- Never touch the lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced.

To obtain a replacement Lamp unit

Lamp model number is on page 39. Check the lamp model and then purchase it from an LG Electronics Service Center.
Using another manufacturers lamp may cause damage to the projector.

Lamp unit disposal

Dispose of the used lamp by returning it to the LG Electronics Service Center.

<Front panel of the Projector>

Lamp indicators

Summary of Contents for DX540 - XGA DLP Projector









































Reviews: