7
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
w
WArNiNg
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric
shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
w
WArNiNg
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,
including the following:
•
Do not, under any circumstances, cut or remove
the ground prong from the power cord.
To prevent
injury to persons or damage to the dryer, the electrical
power cord must be plugged into a properly grounded
outlet.
•
For personal safety, this dryer must be properly
grounded.
Failure to do so can result in electric shock
or injury.
•
Refer to the installation instructions in this manual
for specific electrical requirements for your model.
Failure to follow these instructions can create an
electric shock hazard and/or a fire hazard.
•
This dryer must be plugged into a properly
grounded outlet. Electric shock can result if the
dryer is not properly grounded. Have the wall
outlet and circuit checked by a qualified electrician
to make sure the outlet is properly grounded.
Failure to follow these instructions can create an
electric shock hazard and/or a fire hazard.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
The dryer should always be plugged into its own
individual electrical outlet which has a voltage
rating that matches the rating plate.
This provides
sparkling performance and also prevents overloading
house wiring circuits which could cause a fire hazard
from overheated wires.
•
Never unplug your dryer by pulling on the power
cord. Always grip plug firmly and pull straight out
from the outlet.
The power cord can be damaged,
resulting in a risk of fire and electric shock.
•
Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end.
The power cord can
melt, creating an electric shock and/or fire hazard.
•
When installing or moving the dryer, be careful not
to pinch, crush, or damage the power cord.
This will
prevent injury and prevent damage to the dryer from
fire and electric shock.
SAVE THESE INSTRUCTIONS
iMPOrTANT SAFETY iNSTruCTiONS
MFL69702032_en_180118.indd 7
2018.1.18 1:41:55 PM
