46
SMArT FuNCTiONS
Smart ThinQ Application Features
• For appliances with the
or
logo
Dryer Cycle (Remote Start, Download Cycle)
Set or download any preferred cycle and operate by
remote control.
Venting Tips
Provides venting tips.
Smart Diagnosis™
This function provides useful information for diagnosing
and solving issues with the appliance based on the
pattern of use.
Energy Monitoring
The dryer energy usage is affected by the cycles and
options so you may see some changes in energy usage
from one cycle to another.
Push Alerts
When the cycle is complete or the appliance has
problems, you have the option of receiving push
notifications on a smart phone.
Settings
Set the product nickname and delete product.
NOTE
• To verify the Wi-Fi connection, check that
Wi-Fi
icon on the control panel is lit.
• LG Smart ThinQ is not responsible for any network
connection problems or any faults, malfunctions, or
errors caused by network connection.
• The machine supports 2.4 GHz Wi-Fi networks only.
• If the appliance is having trouble connecting to the Wi-
Fi network, it may be too far from the router. Purchase
a Wi-Fi repeater (range extender) to improve the Wi-Fi
signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
• The network connection may not work properly
depending on the internet service provider.
• The surrounding wireless environment can make the
wireless network service run slowly.
• This information is current at the time of publication.
The application is subject to change for product
improvement purposes without notice to users.
Using Dryer Cycle
Remote Start
Use a smart phone to control the appliance remotely or
check to see how much time is left in the cycle.
Using Remote Start
1. Press the
Power
button.
2. Load the laundry.
3. Press and hold
Remote Start
button for 3 seconds to
enable the Remote Start function.
4. Start a cycle from the LG Smart ThinQ application on
your smart phone.
NOTE
• Once the Remote Start mode is enabled, you can
start a cycle from the LG Smart ThinQ smart phone
application. If the cycle is not started, the machine will
wait to start the cycle until it is turned off remotely
from the application or the Remote Start mode is
disabled.
• If the door is open, Remote Start is disable.
Disabling Remote Start
When the Remote Start is activated, press and hold the
Remote Start
button for 3 seconds.
Download Cycle
Download new and special cycles that are not included in
the basic cycles on the appliance.
Appliances that have been successfully registered can
download a variety of specialty cycles specific to the
appliance.
Only one cycle can be stored on the appliance at a time.
Once cycle download is completed in the appliance, the
appliance keeps the downloaded cycle until a new cycle is
downloaded.
MFL69702032_en_180118.indd 46
2018.1.18 1:43:13 PM
