E-3
FEATURES
FEATURES
■
ATAPI/E-IDE interface
■
Random access time (DVD-ROM:120ms Typical, CD-ROM:80ms Typical)
■
Multimedia PC compatible
■
Photo CD multisession support
■
Data transfer rate(DVD-ROM max-4x-speed:5400Kbyte/sec,
CD-ROM max-32x-speed: 4800 Kbyte/sec)
■
Intelligent 512KB data buffering system
■
Horizontal and vertical mounting support
■
Tray Loading system without caddy
■
Designed for internal mounting
■
Emergency Eject Support
■
Easy audio CD control button support
■
Supports Windows 95 Plug and Play ATAPI protocol
■
CD-R, CD-RW Support
SYSTEM REQUIREMENTS
An IBM PC or compatible with the following system components:
■
IBM Compatible Pentium-133 MHz or above
(With PIO mode 4, TX chip set recommended)
■
A Minimum of 16MB memory
■
Floppy disk drive (3
1
/
2
inch)
■
MS-DOS version 3.1 or greater
■
An open, front-facing, half-height drive bay.
■
An existing IDE controller in your PC with an available cable connector or a new
IDE controller that you will install.
SUPPLIED ACCESSORIES
Item
Owner’s Manual
Setup Diskette
Audio Cable
Quantity
1
1
1
