10
C
onnecting
2
Connecting
Connecting to your TV
Connecting antenna
Antenna connection
Connect the Terrestrial TV antenna to the ANTENNA
IN jack on the unit. If you want to use an indoor
antenna, use one with a signal amplifier rated at 5V,
100mA and set [Antenna Feed 5V] to [ON] in the
setup menu. (See page 17)
Antenna connection to your TV
Connect one end of the RF cable to ANTENNA OUT
jack on the unit and other end to ANTENNA IN jack
on your TV. Passes the signal from the ANTENNA IN
jack to your TV/monitor.
COAXIAL
ANTENNA IN
Rear of the Unit
RF Cable
TV
Connecting Video / Audio
cable
Connect the VIDEO/AUDIO OUTPUT on the unit
to VIDEO/AUDIO IN on TV with Video/Audio cable,
such as VIDEO with yellow, AUDIO Left/Right with
white/red.
Video/Audio Cable
TV
Rear of the Unit
Connecting SCART cable
Connect the TO TV jack on the unit and your TV
using the SCART cable.
For SCART connections, resolution must be set to
576i(480i) by pressing RESOLUTION button.
COMPONENT VIDE
VIDEO IN
L
P
B
Y
SCART
Cable
Rear of the Unit
TV
y
You must set the [TV Output Select] option to
[RGB] on the setup menu to use this connection.
DP829H-E.BITALLK_1135-ENG.indd 10
2012-02-03 �� 7:07:49