background image

48

WArrANTY

LG ELECTRONICS CANADA, INC.

LG DRYER LIMITED WARRANTY - Canada

•  Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever 

is greater.

• Replacement products and parts may be new or remanufactured.

• LG Authorized Service Center warranties their repair work for thirty (30) days.

LG CANADA’S SOLE LIABILITY IS LIMITED TO THE WARRANTY SET OUT ABOVE. EXCEPT AS EXPRESSLY PROVIDED ABOVE, LG CANADA 

MAKES NO AND HEREBY DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER EXPRESS OR IM-

PLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE, AND NO REPRESENTATIONS SHALL BE BINDING ON LG CANADA. LG CANADA DOES NOT AUTHORIZE ANY  

PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE 

EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE EXPRESS WARRANTY PERIOD ABOVE. 

LG CANADA, THE MANUFACTURER OR DISTRIBUTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT OR 

INDIRECT DAMAGES, LOSS OF GOODWILL, LOST PROFITS, PUNITIVE OR EXEMPLARY DAMAGES OR ANY OTHER DAMAGE, WHETHER ARIS-

ING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH, FUNDAMENTAL OR OTHERWISE, OR FROM ANY ACTS OR  

OMISSIONS, TORT, OR OTHERWISE. 

This warranty gives you specific legal rights. You may have other rights which may vary from province to province depending on applicable provincial 

laws.  Any term of this warranty that negates or varies any implied condition or warranty under provincial law is severable where it conflicts with  

provincial law without affecting the remainder of this warranty’s terms. 

For complete warranty details and customer 

assistance, please call or visit our website: 

      Call 1-888-542-2623 (24 hours a day, 365 days 

a year) and select the appropriate option from 

the menu, or visit our website at http://www.

lg.ca

 All costs associated with the above excluded circumstances shall be borne by the consumer.

Write your warranty information below:

Product Registration Information:
Model:
Serial Number:
Date of Purchase:

WARRANTY:

 Should your LG Dryer (“Product”) fail due to a defect in material or workmanship under normal home use during the war-

ranty period set forth below, LG Canada will at its option repair or replace the Product upon receipt of proof of original retail purchase. 

This warranty is valid only to the original retail purchaser of the product and applies only to a Product distributed in Canada by LG 

Canada or an authorized Canadian distributor thereof. The warranty only applies to Products located and used within Canada.

THIS LIMITED WARRANTY DOES NOT COVER:

1.  Service trips to deliver, pick up, or install the product; instructing a customer on operation of the product; repair or replacement of fuses or  

correction of wiring , or correction of unauthorized repairs/installation.

2.  Failure of the product to perform during power failures and interruptions or inadequate electrical service.

3.  Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air.

4.  Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product owner’s manual.

5.  Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.

6.  Damage resulting from the misuse, abuse, improper installation, repair, or maintenance of the Product.  Improper repair includes use of parts not approved or 

specified by LG Canada.

7.  Damage or product failure caused by unauthorized modification or alteration, or use for other than its intended purpose, or resulting from any water leakage 

due to improper installation.

8.  Damage or Product failure caused by incorrect electrical current, voltage, commercial or industrial use, or use of accessories, components, or cleaning prod-

ucts that are not approved by LG Canada.

9.  Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product, unless such damage 

results from defects in materials or workmanship and is reported within one (1) week of delivery.

10.  Damage or missing items to any display, open box, discounted, or refurbished Product.

11.  Products with original serial numbers that have been removed, altered, or cannot be readily determined.  Model and Serial numbers, along with original retail 

sales receipt, are  required for warranty validation.

12.   Increases in utility costs and additional utility expenses.  Replacement of light bulbs, filters, or any consumable parts. Repairs when your Product is used in 

other than normal and usual household use (including, without limitation, commercial use, in offices or recreational facilities) or contrary to the instructions 

outlined in the Product owner’s manual.

15.  Costs associated with removal of the Product from your home for repairs.

16. The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with  published installation instruc-

tions, including the Product owner’s and installation manuals. 

17.  Accessories to the Product such as door bins, drawers, handles, shelves, etc.. Also excluded are parts besides those that were originally included with the 

Product.

One (1) year from the date of original 

retail purchase

Period

WARRANTY PERIOD: (Note: If the original date of purchase can not be verified, the warranty will begin 

sixty(60) days from the date of manufacture).

Scope of Warranty

Ten (10) years from the date of original 

retail purchase

Parts and Labor (internal/functional parts 

only)

Dryer Drum (Parts and Labor)

MFL67731041_en_141023.indd   48

2014.10.23   11:18:49 AM

Summary of Contents for DLG3170 Series


















































Reviews: