43
OPERATION
ENGLISH
Energy Saver
This option helps to reduce the energy
consumption of the
Normal
cycle, depending on
the load size. When the
Energy Saver
option is
selected, the cycle begins with an air dry section
and the drying time is increased.
NOTE
• The
Energy Saver
option is turned on by default
in the
Normal
cycle.
• Turning the
Energy Saver
option off changes
the default cycle to the last cycle used. To return
to the default settings, turn the
Energy Saver
option on.
More Time / Less Time
Use these buttons to increase or decrease drying
time in 5 minute increments when you use manual
drying cycles such as
Air Dry
and
Speed Dry
.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the
Wrinkle Care
button before you start a
drying cycle.
NOTE
• When the option is turned on, a rectangle with a
dashed line and
ENd
appears on the display until
the feature is off.
• When the option is turned on, only the
Power
button works after the drying cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press
Start/Pause
.
• Always turn off the appliance before unloading
the clothes.
Drum Light
The drum is equipped with a light that illuminates
when the appliance is turned on. The light
automatically turns off when the dryer door is
closed and the cycle starts.
To turn on the light during a cycle, press and hold
the
Signal
button for 3 seconds. The drum light
will turn on and then turn off automatically after 4
minutes.
Signal
Use this button to adjust the volume of the end of
cycle signal or turn off the signal. Press the
Signal
button repeatedly until the desired volume setting
is lit.
Damp Dry Signal
When this option is selected, the appliance signals
when the load is approximately 80% dry. This
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
Press the
Damp Dry Signal
button before you
start a drying cycle.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating the dryer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the
Power
button.
• When the controls are locked,
CL
and the
remaining time are alternately shown on the
display during the dry cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
TurboSteam
button for 3
seconds to activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
