LG DL X670 Series Owner'S Manual Download Page 56

Page: 56 / 64

TROUBLESHOOTING

Odors

Wi-Fi

Problem

Possible Cause & Solution

The appliance has an

unpleasant odor.

Are you using the appliance for the first time?

• The odor is caused by the rubber material inside the appliance. The odor normal when the

appliance is new and disappears after you run several cycles.

Do you smell an odor during use?

• Do not exceed the manufacturer's recommended amount of detergent when washing

clothes. Excess detergent can build up on clothing and cause odors.

• Leaving clothes in the washer or dryer after the cycle ends can lead to odors. Unload

clothing promptly when the cycle ends.

• If the odor is coming from the washer, follow the instructions in the product manual to

clean the washer tub/drum.

• Keep lint filters clean. Clogged or dirty lint filters can cause odors. After cleaning the lint

filter, allow it to dry completely before using it.

Problem

Possible Cause & Solution

Trouble connecting

appliance and

smartphone to Wi-Fi

network.

The password for the Wi-Fi network was entered incorrectly.

• Delete your home Wi-Fi network and begin the connection process again.

Mobile data for your smartphone is turned on.

• Turn off the

Mobile data

on your smartphone before connecting the appliance.

The wireless network name (SSID) is set incorrectly.

• The wireless network name (SSID) should be a combination of English letters and

numbers. (Do not use special characters.)

The router frequency is not 2.4 GHz.

• Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and

connect the appliance to the wireless router. To check the router frequency, check with

your Internet service provider or the router manufacturer.

The appliance is too far from the router.

• If the appliance is too far from the router, the signal may be weak and the connection may

not be configured correctly. Move the router closer to the appliance or purchase and

install a Wi-Fi repeater.

During Wi-Fi setup, the app is requesting a password to connect to the product (on

certain phones).

• Locate the network name which starts with "LG" under Settings > Networks. Note the last

part of the network name.
- If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.
- If the network name looks like LGE_Appliance_XXXX, enter XXXX twice as your password.

For example, if the network name appears as LGE_Appliance_8b92, then you would

enter 8b928b92 as your password. In this instance, the password is case sensitive and

the last 4 characters are unique to your appliance.

Summary of Contents for DL X670 Series

































































Search results

Summary of Contents for DL X670 Series

Reviews:

Related manuals for DL X670 Series

Brands by name

Popular brands

LG DL X670 Series, Owner'S Manual

Search results

Summary of Contents for DL X670 Series

Reviews:

Related manuals for DL X670 Series

Brands by name

Popular brands